Can I put 10w40 in a 5w30 engine?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

What happens if I put 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

What happens if you put 10W oil in 5W?

What will happen if I mix 10w oil with 5w oil? – Quora. It will thin it down, as long as your using the same brand, the chemical make up of the oils should be the same.

IT IS IMPORTANT:  Best answer: When was the petrol engine invented?

Can you put 10W 30 oil in a 5w30 engine?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

Will using 10W-40 an on engine that is asking for 5W-30 negatively affect my engine if yes in what ways?

With that said, there is very little chance that using 10w40 in your vehicle that specifies 5w30 is going to produce noticeable negative results. If you read your service manual it may even recommend 10w40 for excessively hot climates. You may notice more oil pressure and very slightly less fuel economy.

Is 10w40 better than 5w30?

The first number in the motor oil’s name describes the oil’s cold viscosity. … A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Is 10w40 good for high mileage?

Mobil 1 High Mileage 10W-40 motor oil is recommended by ExxonMobil for use in high mileage vehicles (even those that have used lower quality conventional oils), including: Cars.

Can I use 10W40 instead of 10w30?

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

IT IS IMPORTANT:  Can you drive a car with a broken motor mount?

Will it hurt to mix 10w30 with 5w30?

No- you wont get the desired output by mixing these two oils. Because , both have different grades, 5w30 is more light and the density is less , and is intended for light usage (scooters). Whereas a 10w30 is a higer grade with more density and suitable for more higher capacity engines.

Can I use 10W40 instead of 5w40?

10w40 is thicker than 5w40, ONLY when cold. At operating temperature it is exactly the same. Multi-viscosity oils with a lower W number are specifically designed to flow better, and thus lubricate better, at very low temperatures. There is no need to use a 5w-40 if the vehicle only requires 10w-40.

What is 10W40 oil?

What Does 10W40 Mean? 10W-40 is the viscosity, or weight, of the motor oil as defined by the Society of Automotive Engineers (SAE for short). A 10W-40 oil has a viscosity grade of 10W at a low temperature and 40 at a higher temperature. … It just behaves like a 10W weight oil when cold and like a 40 weight oil at hot.

Can you put 10W oil in a 5W car?

With temperatures going down to 20F a 10W oil will not be an issue. … There is a small benefit of using a 10W instead of a 5W oil in that the 10W will normally have less viscosity improvers in it. Viscosity improvers help the oil behave “thicker” at higher temperatures, but they do not actually provide lubrication.

Is 10W30 good for winter?

A 10W flows well in cold weather, to protect the engine at start up, but it’s is too thin for use in the summer. A 30 grade oil, thick enough to protect in the heat, was recommended for summer use. … A 10W-30 had the winter cold start flow properties of a 10W and the summer, high-temperature thickness of a 30 grade.

IT IS IMPORTANT:  How many cylinders can AV type engine have?

What happens if you put 10W40 instead of 5w20?

Lose a little gas. mileage and lubrication is not as good plus it puts more strain on the oil pump. Never go thicker than a 5w30 and that would be more for an older higher mileage engine in warmer climates. So go change it back to 5w20.

Is 10W40 better for older cars?

Applications of 10W-40 Motor Oil

Drivers commonly use 10W-40 motor oil in vehicles with higher mileage because the oil is thicker while the engine is hot; this helps lubricate older moving parts. This oil is meant to start up vehicles in winter climates that experience temperatures of 10 degrees Celsius.

What is the difference between 10W-40 and 5W 40 engine oil?

The main difference between the two oil types is that one is thinner than the other. The 5W40 is thinner than the 10W40 at lower temperatures. … On the other hand, the 10W40 motor oils are thicker than the 5W40 oils for good reasons. This oil type works pretty well in lubricating engine parts during startup.