How much is a ls3 crate engine?

For about $6,500, the new Camaro LS3 crate engine packs a 4.065-inch bore and matching performance cylinder heads and makes 430 hp and 424 lb-ft from the factory. This thing is such a good deal, you have to pay attention.

How much do LS engines cost?

The price ranges on these engines vary from $1,500-$2,500, which is still a fair price for any of these powerplants. Now we’re starting to get into the more desirable engines that will cost you $2,500-$4,500. The LS1 and LS6 used in the F-body and Corvettes offered 350 cubic inches and were built with aluminum blocks.

How much is a LS3 motor and transmission?

Engine and Trans Includes:

at 4,400 rpm. The LS376/525 is available under part number 19259233 and carries a suggested retail price of $8,937.50. For installation in older vehicles, the engine controller kit part number 19259261 is calibrated specifically for this new engine.

How much does a LS3 cost?

SALE PRICE: $7,861

The LS3 6.2L is the 430-hp standard engine in the Chevrolet Camaro SS and the all new RWD Chevy SS. It is a fantastic combination of high technology and uncompromising performance.

IT IS IMPORTANT:  Is it bad to drive your car through a flood?

What vehicles came with an LS3?

GM 6.2 Liter V8 Small Block LS3 Engine

Displacement: 6.2L / 376 cu. in.
Vehicles: Chevrolet Corvette, Corvette Grand Sport, Camaro SS ,SS, Pontiac G8 GXP
Introduced: 2007 model year
Discontinued:
Predecessor: LS6 / Gen 3 Small Block

How much does a LS3 engine swap cost?

Claim 1: An LS Swap Costs Less Than $1000

Not able or willing to go so far to cut costs? A more realistic starting budget is around $1500 to $2000 for a basic swap using a common truck engine, factory exhaust manifolds, and your existing front crossmember and rear axle.

What transmission goes with a LS3?

Transmission Specs:

6L80-E six-speed automatic. Rated for up to 650 lb. -ft.

How much is a LS3 engine swap?

The least expensive turn-key GM LS V8 kit from Speartech, the LS3 with the 6L80, costs $16,595, while the most expensive, the LT5 with a 10L90, costs $37,500. Head on over to the company’s website for more information on these create engine kits or to place an order.

How long do LS3 engines last?

In normal use, this reliable, extremely tough 803cc motor would last around 10,000 to 20,000 miles before it needed a complete rebuild.

How much can you bore a 6.2 LS3?

The cylinders can be bored to 4.080 in. However, we recommended leaving them as thick as possible when running boost. When bored and stroked, displacement can be as high as 427 c.i.d. (7.0 L). The block can handle 850 to 1000 horsepower.

How much horsepower is a LS3?

Hot Performance

The LS3 delivers a stunning 495 horsepower and 473 lb. -ft. of torque.

IT IS IMPORTANT:  What is the advantage of turbocharged engine?

Is 5.3 or 6.2 engine better?

The 6.2 is hands down a more fun motor and will tow significantly better than any of the 5.3 motors, but the 5.3 is no slouch.

Is a LS3 a big block?

It’s a Small Block. 376 Cubic Inches.

How much boost can a stock LS3 handle?

Each of the engine builders that we spoke with were concise and to the point that the stock LS3 rotating assembly is more than capable of handling the boost levels to attain 500 horsepower.