Can I bypass transmission cooler?

It is possible to bypass the factory cooler in the radiator by blocking off the input/output locations for the transmission cooler on the radiator. You would then need to mount the largest possible cooler that you can get to fit or install a remote cooler with its own fan.

What happens if you bypass transmission cooler?

The thermal bypass is a small added valve that goes in the transmission line. When the transmission is cold, the thermal bypass will “bypass” the cooler so it can bring the transmission up to operating temperature more quickly.

Should I bypass my transmission cooler?

Bypassing your radiator transmission cooler would likely cause the fluid in your transmission to over heat causing premature transmission failure. If you are going to bypass it and hook up a better cooler … maybe but if you are eliminating a cooler al together that’s a terrible idea.

Can you delete a transmission cooler?

These two lines can be accessed either from underneath the hood or underneath the vehicle. … Slide both transmission cooler lines away from the vehicle, pulling each line from the transmission rather than the radiator to complete the removal process.

IT IS IMPORTANT:  How do I keep my windshield wipers from rubbing?

Can you drive with a broken transmission cooler?

Driving your car with a bad transmission cooler is definitely not recommended. Because you will lose most of your transmission fluid while the car’s transmission is in operation and you are in motion, it is very difficult to know how much fluid you are losing, and at what rate.

Should transmission cooler be before or after radiator?

Answer: We recommend installing the auxiliary cooler after the radiator to return the coolest fluid directly to the transmission. Installing the cooler before the radiator will still provide additional cooling and may be necessary in some difficult-to-access applications.

Does transmission cooler increase performance?

Keeping Your Transmission Cool for Best Performance

A transmission cooler helps the transmission stay cool, even when working harder than normal, which in turn lets you get the best performance and long life out of it.

How much does it cost to install a transmission cooler?

As a DIY project, you’ll pay between $30 and $60 for the oil cooler and spend 1 1/2 to 2 hours on installation. You can have a local transmission shop install a transmission oil cooler in your vehicle. Expect to pay between $150 and $250 for the job.

What size transmission cooler do I need?

You should get the biggest heavy duty transmission cooler that can fit on your car! The larger the cooler, the better it will be at lowering fluid temperature. The plate and fin and the stacked plate coolers offer a larger surface area to cool transmission fluid faster and better, which is why they are so popular.

IT IS IMPORTANT:  What is a 540 size RC motor?

What is an auxiliary transmission cooler?

An auxiliary cooler will keep your transmission running right where it needs to be, ensuring you don’t overheat your transmission. Driving Conditions – If you live somewhere that gets excessively hot or is fairly hilly or mountainous, an auxiliary transmission cooler is a good option for you.

Does manual transmission need cooler?

Since manual transmissions don’t have a torque converter constantly producing large amounts of heat, a reasonably sized cooler will be sufficient, it doesn’t need to be massive.

Do you need an automatic transmission cooler?

In terms of transmission operating temperatures keeping the fluid 200 degrees or less is preferred for long life — for every 20-degree increase in temperature above that, the life of the fluid is cut in half. … When it comes to cooling a transmission we never use radiators with built-in transmission coolers.