Frequent question: Does it matter which way you mount a transmission cooler?

Expert Reply: The Derale stacked plate transmission coolers like part # D13403 can be mounted in any orientation that you need including having the hose fittings down. The line pressure from the transmission will push all of the fluid through the cooler regardless of how it is mounted.

Are transmission cooler lines directional?

Can Transmission Fluid Flow Through Either Direction on a Transmission Cooler. Helpful Expert Reply: … The cooler can have fluid flow in either direction through it.

What happens if you hook up transmission cooler lines backwards?

If you had it reversed, the pump would be trying topush fluid through the bottom of the cooler, up through the cooler, out the top into the bottom of the rad, and up through the rad to the top. More weight to push.

Can you mount a transmission cooler vertical?

Expert Reply: Yes, the core in Derale transmission cooler # D13403 can be mounted so that the lines enter and exit from the side rather than the top. There is enough pressure in the lines to push the fluid through no matter how you choose to mount it!

IT IS IMPORTANT:  How many electric cars have been sold in 2019?

Should transmission cooler be before or after radiator?

Answer: We recommend installing the auxiliary cooler after the radiator to return the coolest fluid directly to the transmission. Installing the cooler before the radiator will still provide additional cooling and may be necessary in some difficult-to-access applications.

Should I bypass radiator transmission cooler?

Bypassing your radiator transmission cooler would likely cause the fluid in your transmission to over heat causing premature transmission failure. If you are going to bypass it and hook up a better cooler … maybe but if you are eliminating a cooler al together that’s a terrible idea.

Can a transmission cooler be too big?

Too big could be a concern if mounted in the front of the rad creating a loss of air flow to keep the engine cooled . Years ago , GM released a TSB about overcooling the transmission in cold climates . Transmission fluid would actually turn to somewhat of a gel .

How do transmission cooler lines connect to radiator?

Transmission coolers do not attach to the radiator. They attach in-line with the transmission fluid return line. It is common for an OEM transmission cooler to be built into the radiator tank to be cooled by the coolant in the radiator.

Do I need a transmission cooler to tow?

Do I Need a Transmission Cooler? Transmission coolers help to protect your transmission when you turn up the heat. … For the same reason, the addition of an auxiliary transmission fluid cooler isn’t just necessary for those who tow trailers anymore.

Where are transmission cooler lines?

Remove the two transmission cooler lines from the bottom of the radiator. These two lines can be accessed either from underneath the hood or underneath the vehicle. Use the flare nut wrench to remove the lines in the same manner used to remove the lines from the transmission.

IT IS IMPORTANT:  Do all cars have fuse boxes?

Can I use rubber hose for transmission cooling lines?

You can use rubber hose, but make sure it’s transmission cooler line rated. The pressure is quite low (12-15 psi). Double clamp it or use FI type clamps instead of the worm-drive style.

How much does it cost to have a transmission cooler installed?

As a DIY project, you’ll pay between $30 and $60 for the oil cooler and spend 1 1/2 to 2 hours on installation. You can have a local transmission shop install a transmission oil cooler in your vehicle. Expect to pay between $150 and $250 for the job.

How do you install a transmission line?

How to Change Transmission Lines: Do It Like a Pro

  1. Raise the Vehicle.
  2. Drain the Transmission Fluid.
  3. Remove the Transmission Cooler Lines.
  4. Drain More Fluid.
  5. Spray Brake Cleaner.
  6. Install the New Transmission Lines.
  7. Replace the Transmission Fluid.
  8. Lower and Start your Vehicle.