Frequent question: Is Type F transmission fluid the same as mercon?

General Motors referred to its ATF as Dexron II and Ford’s specified fluid was labeled Mercon. Ford first produced its own ATF in 1967 and referred to as Type F. … This fluid was used in all Ford transmissions until 1977 and most Ford transmissions until 1980.

Can you mix type F with Mercon?

It’s generally held that a quart or two of F and the rest of a C4 filled with Mercon works fine.

What is the difference between Type F and Mercon transmission fluid?

The base stock of both of these fluids are identical, they both contain additives to prolong the life of the seals, and the only difference is the friction modifying package.

Can Mercon replace Type F?

Ford ceased licensing Mercon in 2007 and now recommends Mercon V for all transmissions that previously used Mercon. Mercon is a suitable replacement for Type H and Type CJ fluid, but not for Type F.

IT IS IMPORTANT:  How do rear engine cars work?

What is Type F transmission fluid equivalent?

You can use Ford Mercon III or Mercon V. I have used them for several years now with no ill effects. Ford has also approved them for use.

What fluid is compatible with Type F?

Ford type ‘F’ is a ‘grippier’ fluid and could adversely shorten front and rear clutch life. It was used by some racers for more clutch ‘bite’ in racing applications (not for street). If the clutch disc manufacturer recommends Dexron ATF, stick with Dexron ATF.

Can you put Type F transmission fluid?

RAY: If you put Dexron, Mercon or Chrysler 7176 transmission fluid in just about any transmission, it will perform just fine. … And in transmissions that are not designed for it, Type F fluid will cause rough shifts, and can even cause damage by making the torque converter engage before it should.

Can you use Type F transmission fluid in a Chevy?

Type “F” fluid is a heaver viscosity. Stands more heat also. Just the installation of type “F” fluid will have a firmer shift. You can not use it in a any of the GM overdrive transmissions.

Is Type F transmission fluid the same as ATF?

General Motors referred to its ATF as Dexron II and Ford’s specified fluid was labeled Mercon. Ford first produced its own ATF in 1967 and referred to as Type F. … This fluid was used in all Ford transmissions until 1977 and most Ford transmissions until 1980.

What viscosity is Type F transmission fluid?

Additional Details

Specific Gravity @ 60°F 0.864
Viscosity, Kinematic
cSt @ 40°C 43
cSt @ 100°C 7.6
Viscosity Index 146
IT IS IMPORTANT:  Question: Is it better to repair car before trade in?

What replaces ATF Type A?

The “Type A, Suffix A” specification replaced Type “A” in the late 1950’s. Dexron “B” fluid later replaced Type A, Suffix A. All iterations of Dexron B, Dexron II and Dexron III ATF products are backward compatible with Type A and Type A , Suffix A fluids.

Can I mix ATF with power steering fluid?

Yes, you can. Just as you would for your car’s oil and antifreeze or brake fluid—as long as you’re mixing the same type of fluid with another of the same type (for example, ATF+ATF). Mixing different types of power steering fluid can cause you to lose your power steering.

Can you mix regular transmission fluid with synthetic fluid?

Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible with each other.

Is Type F transmission fluid the same as DEXRON?

Type F has a higher friction coefficient. Dexron or Type A is NOT compatible with seals in Type F applications. The F is for the suffix in Ford’s specification, M2C33 suffix F. Do not use Dexron/Mercon in a Type F application.

What is the best type F transmission fluid?

Valvoline™ Type F is a high-quality transmission fluid specifically engineered to protect and prolong the life of automatic transmissions. Recommended for use in the following applications: Ford specifications M2C33-F, M2C33-G and Ford Type F fluids are recommended.

What happens if you put the wrong type of transmission fluid in your car?

Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.

IT IS IMPORTANT:  Question: How much pressure does it take to break a car window?