What is the 4 7 Dodge engine?

The 4.7-liter V8 engine found in Dodge vehicles is also known as the Powertech engine. It is the innovation of Dodge’s parent company Chrysler. It set out to replace the legendary 318 cubic-inch pushrod small-block V8.

Is the 4.7 V8 Magnum a good engine?

All things considered, the 4.7L PowerTech/Magnum engine is pretty reliable. However, it’s only getting older so many potential issues become fair game. Maintain your Chrysler 4.7 PowerTech well and it should reward you with sound reliability.

Is the Dodge 4.7 a bad engine?

The 4.7L beast is extremely reliable. All of the above-mentioned issues are ones that are mostly caused due to excessive wear and tear and overheating. So, if you keep the engine maintained at all times, and get all repairs done in time, then there is a very high probability that you won’t run into any issues.

Is a 4.7 a V8 or V6?

This was the first new V8 engine for Chrysler since the 1960s. … A 4.7 L V8 came first, fitted in the Jeep Grand Cherokee, and a 3.7 L V6 version debuted in 2002 for the Jeep Liberty.

IT IS IMPORTANT:  Frequent question: What happens if a leased car is scratched?

What is the 4.7 Dodge engine?

The 4.7L (286.7 ci) Dodge engine is a Chrysler PowerTech available in V6 and V8. 286.7 cubic inches, cast iron with aluminum heads, a bore and stroke of 3.66 x 3.405, and horsepower starting at 235 and going up from there depending on your make and model.

How much horsepower does a 4.7 liter V8 engine have?

The standard Powertech 4.7 V8 engine has a compression ratio of 9 to 1 and produces 235 horsepower and 295 lb. -ft. of torque.

What is a 5.7 Hemi?

It is a 90-degree V8, 2-valve pushrod design like the past Magnum series engines, displacing 5,654 cc (345 cu in), with a bore of 3.917 in (99.49 mm) and a stroke of 3.578 in (90.88 mm). The 5.7 L Hemi is made at Chrysler’s Saltillo Engine plant in Ramos Arizpe, Mexico.

How much horsepower can a Dodge 4.7 make?

The Dodge 4.7L engine initially produced 235 horsepower at 4,600rpm with maximum revolutions of 6,000rpm.

How much HP does a 4.7 Magnum have?

The next generation of the 4.7L carries the initials “H. O.,” for High Output. This iteration has a horsepower rating of 265 horsepower and torque of 330 foot-lbs. The final version of the 4.7L, the “Corsair,” debuted with 290 horsepower and 320 foot-lbs of torque.

What liter is a 318 Dodge motor?

Displacement: 318 cu in (5.2 L)

Did Dodge make a 4.9 liter V8?

Dodge didn’t make a 4.9L V-8. The writers probably meant a 5.9L. The incision on the neck for an emergency tracheotomy is the other way around (vertically and not horizontally as done) to avoid injuring the carotids arteries, jugular veins and thyroid gland.

IT IS IMPORTANT:  Best answer: Does a new engine make the car last longer?

Can you switch from 4.7 to Hemi?

Yes, you have to switch the fuel line(sorta) because the 4.7 and 5.7 use different engine side connectors.

What does 4.7 l V8 mean?

The displacement of an engine, or the engine’s size, refers to the amount of space its cylinders take up. … This simply means that the cylinder space of the engine displaces 5 liters or roughly 302 cubic inches. Naturally, cars with more cylinders will typically have larger displacements.

What cubic inch is a 5.7 Hemi?

The 5.7 Hemi is 345 ci and the ’05 version makes 345 hp (as rated in the Ram 1500), or exactly one horsepower-per-cubic-inch.

How much can a 4.7 V8 pull?

When equipped with the 4.7-Liter v8 engine, the dodge ram 1500 has a towing capacity of 7,730 pounds.